From bdffcac12ded6dab573bf810d005881727e72c4a Mon Sep 17 00:00:00 2001 From: Milan Ventil Toman Date: Fri, 29 May 2020 14:04:26 +0200 Subject: [PATCH] Readme update --- readme.md | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/readme.md b/readme.md index 7506ab4..69ac129 100644 --- a/readme.md +++ b/readme.md @@ -34,17 +34,17 @@ IO pin, currently configured as interrupt, when new packet is received (i.e. goe The functionality is currently just to light up a led, interrupt based receive is not implemented. ###2, Clone this repo, get Micropython -''' +``` git clone https://bastart.spoton.cz/git/Ventil/esp8266_CC1101_davis_vantage_vue.git cd esp8266_CC1101_davis_vantage_vue wget https://micropython.org/resources/firmware/esp8266-20191220-v1.12.bin -P /tmp -''' +``` ###3, Upload Micropython, check Need to delete the flash first, then write the custom firmware. You need to determine which device is the one to write to. If you have only one ESP8266, you are probably safe to use the ttyUSB0, I will use ttyUSB1 as I have multiple UARTS on my machine -''' +``` esptool.py --port /dev/ttyUSB1 --baud 115200 erase_flash esptool.py v2.8 Serial port /dev/ttyUSB1 @@ -60,9 +60,9 @@ Stub running... Erasing flash (this may take a while)... Chip erase completed successfully in 7.8s Hard resetting via RTS pin... -''' +``` Now it is time to upload uPython: -''' +``` esptool.py --port /dev/ttyUSB1 --baud 115200 write_flash 0 /tmp/esp8266-20191220-v1.12.bin esptool.py v2.8 Serial port /dev/ttyUSB1 @@ -84,9 +84,9 @@ Hash of data verified. Leaving... Hard resetting via RTS pin... -''' +``` And of course, when you try to get to the serial console, you should get somethinglike this -''' +``` picocom -b 115200 /dev/ttyUSB1 picocom v3.1 @@ -117,7 +117,7 @@ Terminal ready >>> -''' +``` ###4, Freeze modules, or just upload the .mpy files ###5, Modify inte.conf ###6, Upload files