How to install MP

Micropython_install.md

@@ -0,0 +1,13 @@
+# Installation of Micropython .bin on a ESP8266
+Before we can program and use a ESP8266 with python, we need to flash the firmware 
+to MP - a Mirco Python environment especially designed for these microprocessors
+
+We need to dowload the latest MP binary. At the time of writing:
+
+    wget https://micropython.org/resources/firmware/esp8266-1m-20220618-v1.19.1.bin
+
+Then, we need to flash the software to the microcontroller. A script that helps 
+us with this task is called esptool.py which can be downloaded from [HERE|https://github.com/espressif/esptool]:
+
+    esptool.py --port /dev/ttyUSB0 erase_flash
+    esptool.py --port /dev/ttyUSB0 --baud 460800 write_flash --flash_size=detect -fm dout 0 esp8266-1m-20220618-v1.19.1.bin 

README.md

@@ -14,14 +14,18 @@ convertors
    have to test the precision for multiple, averaged measurements. Should be 
    precise enough, if WiFi is turned off and no PWM is used
    
-### Architecture
+### Pinout
 
-        ESP 8266 pins
+    ESP 8266 pins
-        1, 3V3 --> To battery +         2, RX  --> NC
+    1, 3V3 --> To battery +         2, RX  --> NC
-        3, RST --> PULL UP              4, IO0 --> PWR Dump relay start
+    3, RST --> PULL UP              4, IO0 --> PWR Dump relay start
-        5, EN  --> PULL UP              6, IO2 --> FREE, blink indicator?
+    5, EN  --> PULL UP              6, IO2 --> FREE, blink indicator?
-        7, TX  --> NC                   7, GND --> To Battery -
+    7, TX  --> NC                   7, GND --> To Battery -
 
+### Operation
+Monitoring should not really be an issue, or?
+- measurement averaged in 5 measurements, 
+- measurement interval, 3s
 
 ## Hardware requiered
  - ESP8266, version not dependent. v01 will be used for testing
@@ -32,6 +36,7 @@ convertors
    software
 
 ## Software requirements
+ - micoptyhon on SoC
  - obviously a NW infrastructure, TCP / http capable
  - Linux server
  - InfluxDB ?