cleanup

arduino/davis_receiver.ino

@@ -1,76 +0,0 @@
-
-/*
-    Davis logger
-*/
-
-// připojení potřebných knihoven
-#include <Wire.h>
-
-#include "Davis.h"
-#include "SPI.h"
-//
-byte temp;
-String data;
-int incByte = 0;
-
-void setup()
-{
-  delay(100);
-  Serial.begin(9600);
-  delay(100);
-  Radio.begin();
-  Radio.rx();
-
-  Serial.println("Done Setup");
-}
-
-void loop()
-{
-  if (Radio.available() > 0)
-    printPacket();
-  if (hopping)
-    {
-      hopping = 0;
-      Radio.hop();
-      Radio.rx();  // Un-comment if not using Timer 2.
-    }
-}
-
-
-void printPacket(void)
-{
-  byte header = Radio.read();     // Where's the header?
-  byte package[16];
-
-  package[0] = hopIndex;          // Which frequency are we at?
-  package[1] = header;
-  for (int i = 2; i < 11; i++)    //  The received packet.
-  {
-    package[i] = Radio.read();
-  }
-  package[11] = pktRssi;
-  package[12] = pktLqi;
-  package[13] = freqError;
-  package[14] = next;
-  package[15] = pktCount;
-
-  String data = "{'hop':" + String(package[0]) + "," +
-    "'h':" + String(package[1]) + "," +
-    "'b0':" + String(package[2]) + "," +
-    "'b1':" + String(package[3]) + "," +
-    "'b2':" + String(package[4]) + "," +
-    "'b3':" + String(package[5]) + "," +
-    "'b4':" + String(package[6]) + "," +
-    "'b5':" + String(package[7]) + "," +
-    "'b6':" + String(package[8]) + "," +
-    "'b7':" + String(package[9]) + "," +
-    "'b8':" + String(package[10]) + "," +
-    "'b9':" + String(package[11]) + "," +
-    "'rssi':" + String(package[12]) + "," +
-    "'lqi':" + String(package[13]) + "," +
-    "'nxt':" + String(package[14]) + "," +
-    "'cnt':" + String(package[15]) + "}";
-  Serial.println(data);
-  hopping = 1;                  //  Turn on hopping.
-
-}